Αποτελέσματα Αναζήτησης
Programming Remote to Control Another Device There are three ways that you can program your DISH Network remote to control another device, such as a TV, DVD, BD, VCR, audio receiver, or amplifier: • Scanning the Remote Database • Entering a Code • Learning Codes Use Scanning the Remote Database if you don’t know the device code.
This article will help you program your DISH remote to your TV or other device like a DVD player. The article is most helpful if you just got a new TV/device or if the volume button on your remote is not working. Go to instructions for Hopper-family receivers or ViP-model receivers.
FOR EXAMPLE When programming the remote to control combination equipment, such as a TV/VCR or a TV/DVD, program the remote control in one mode, and then repeat the procedure in the other mode. For example, to program the remote to control a TV/VCR using code 748, follow the instructions to program the remote to control the TV using code 748 ...
Complete the following steps to configure your remote. Pull the remote battery cover off. Decide whether to use IR or UHF signals for the remote. Use UHF signals if you do not have a clear line of sight between the remote and the receiver. Set UHF/IR SWITCH to either UHF or IR.
Remote Settings If you would like the VOLUME and MUTE buttons on your DISH remote to work with your TV or other devices, go to the Remote Control Settings menu to program your DISH remote. Press the HOME button.
If you installed this key, continue to page 10, Making the 6.4 UHF Remote Work with DISH-Player DVR 522 and DISH-Player DVR 625 Receivers. Verify the UHF antenna is installed on the back of the receiver. Turn your receiver and TV on, and press SYSTEM INFO on the front of the receiver.
Pair Your Remote. Press and hold the device button you want to program until all four device buttons light up. Press and hold ∙ TV to pair with your TV ∙ DVD or AUX to pair with any other device. Enter the three-digit code for your device while the device buttons are lit up. See Device Codes in this guide. Press #.
