Αποτελέσματα Αναζήτησης
• Calibrate only in a safe area that is free of hazardous gas in an atmosphere of 20.9% oxygen. • Use only BW approved batteries for the GasAlertQuattro detector. Refer to Specifications. • Charge the detector before first-time use. BW recommends the detector be charged after every workday.
The Sensepoint XCD comprises a gas detector transmitter and a choice of sensors for detecting flammable gas, toxic gas and oxygen. The construction of Sensepoint XCD allows it to be used in hazardous area locations; it may also be used in other areas not classified as hazardous.
• To activate the detector, press and hold C in a safe area that is free of hazardous gas and in an atmosphere of 20.9% oxygen. • To deactivate the detector, press and hold C during the powering off countdown.
This operator’s manual describes the 35-3001A-10 oxygen/carbon monoxide sample-draw detector. This manual also describes how to install, start up, maintain, and calibrate the sample-draw detector when using it with a gas monitoring controller.
Carbon Monoxide detection is essential throughout the plant. Typical Applications: • Furnace monitoring • Oven monitoring Typical Gases: Toxic: Carbon Monoxide Agriculture and live stock When it comes to keeping livestock, Methane and Ammonia can build-up to dangerous levels in cattle sheds. Agricultural stores where fertilisers and pesticide
This operator’s manual describes the 35-3001-10 oxygen/carbon monoxide sample-draw detector. This manual also describes how to install, start up, maintain, and calibrate the sample-draw detector when using it with a gas monitoring controller.
This gas detector can measure 3 or 4 gases, such as oxygen (O2), combustible gas (COMB), hydrogen sulfide (H2S) and carbon monoxide (CO) while simultaneously displaying all gas concentrations. If gas concentrations reach a preset level, the detector alerts the user via audible
