Αποτελέσματα Αναζήτησης
Can be used on PVC pipe and fittings up to 6 in. diameter with interference fit. For pool and spa, irrigation, potable water, pressure pipe and DWV applications. Recommended application temperature of 40°F to 110°F / 4°C to 43°C. All Oatey solvent cement and primer products are certified to UL Greenguard Gold.
- CURE TIMES
Average Handling/Set Up Times for PVC/CPVC Solvent Cements....
- CURE TIMES
Average Handling/Set Up Times for PVC/CPVC Solvent Cements. Handling/Set Up Time is the time required prior to handling the joint. In damp or humid weather, allow 50% additional time. Contact Oatey Technical Services for set up times for pipe larger than 8" diameter.
prevent pipe push-out – longer at low temperatures. Wipe off excess. 10. Allow 15 minutes for good handling strength and 2 hours cure time at temperatures above 60ºF before hydrostatic pressure testing up to 180 psi. Longer cure times may be required at temperatures below 60ºF or with pipe diameters over 3”. DO NOT TEST WITH AIR.
• Fast Setting solvent cement formulated for quick pressurization in plumbing, irrigation and DWV applications. • Formulated to provide a longer working time in hot conditions. • Medium body blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit.
• Very fast-setting "Hot" cement formulated for wet conditions and/or quick pressurization and fast installation. • Recommended for pool, irrigation, potable water, pressure pipe, conduit and DWV. • Recommended application temperature 40°F to 110°F / 4°C to 43°C. • No primer needed on non-pressure DWV, where local codes permit.
Low temperatures and moisture will slow both the set time and the curing time of the PVC cement. The Slow Set versions (Hercules makes both the gray and a clear slow set PVC cement) will give you about twice that, or 1 to 2 minutes of set time.
Average Joint Cure Times for PVC/CPVC Solvent Cements. Joint cure time is the time required before pressure testing the system. In damp or humid weather allow 50% additional cure time. line to determine joint cure time. ons and not recommended for repair or cut-ins on hot and cold water distribution systems. Pleas. contact Oatey Te.
