Αποτελέσματα Αναζήτησης
RIDGID Press Tool Attachments for ProPress®Systems, when used with the appropriate RIDGID Press Tool, are designed to mechanically press ProPress fittings onto tubing to create a watertight and permanent seal. When the switch on the press tool is depressed, a motor powers a hydraulic pump which forces fluid into the press tool cylin-der.
Read and understand this manual, the tool operator’s manual, the fitting man-ufacturer’s installation instructions and the instructions for any other equip-ment used with this tool before operat-ing. Failure to follow all instructions may re-sult in property damage and/or serious in-jury.
pressing cross reference guide For our full list of Compact Tool applications, visit RIDGID.com/PressingGuide (For use with BOTH the Compact Tool C1 Actuator and the V1 Actuator)
Press-Fit Tool Compatibility Approval is granted based on performance requirements in IAPMO PS117 and by following the jaw, actuator, and pressing tool operating instructions. The following best practices apply as a requirement of all approvals. • Jaws require cleaning to remove copper buildup or chips. Typically, cleaning
ween NIBCO Press System fittings, valves and copper piping. Only use pressing tools, jaws and chain sets that have been tested and. performed once per year and major service every three years. For technical or service.
MegaPress® Jaws & Rings join ½" - 4" commercially-available Schedule 5-40 steel Pipe when used with Viega® MegaPress® Fittings. For use with Viega MegaPress,® MegaPressG®, MegaPress® Stainless, and MegaPress CuNi Fittings.
The above metallic press connect systems comply to the pipe and fitting manufacturer’s recommended operating pressure of 200psi and a max burst pressure of 600psi. The PEX fittings have been tested to the requirements of ASTM F877-18a (Section 7.6).
