Αποτελέσματα Αναζήτησης
Source code. If you want to compile from the source code for hacking or contributing to the development you can clone the project from the GitHub repository. Our wiki contains detailed instructions for installing the dependencies (see the relevant page: Linux, macOS, Windows).
Slic3r can be downloaded directly from: https://slic3r.org/download or https://github.com/slic3r/Slic3r/releases. Pre-compiled packages are available for Windows, Mac OS X and Linux. Windows users can choose between 32 and 64 bit versions to match their system.
The gcode produced by Slic3r is tailored to particular types of firmware. The first step prompts for the firmware that the printer uses. This should have been specified when the printer was built or configured.
This guide will walk you through the steps of setting up Slic3r for slicing and printing on your SeeMeCNC printer.
Slic3r takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware.
Slic3r is mainly a toolpath generator for 3D printers: it reads 3D models (STL, OBJ, AMF, 3MF) and it converts them into G-code instructions for 3D printers. But it does much more than that, see the features list below.
Welcome to the Slic3r Manual. The source for this manual is available in a GitHub repository. Help us to improve or translate it in your language. More Slic3r documentation is listed in the wiki. Libslic3r source internals are documented via Doxygen.
