Αποτελέσματα Αναζήτησης
Slic3r takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Sprinter and Repetier firmware.
Slic3r is mainly a toolpath generator for 3D printers: it reads 3D models (STL, OBJ, AMF, 3MF) and it converts them into G-code instructions for 3D printers. But it does much more than that, see the features list below.
This guide will walk you through the steps of setting up Slic3r for slicing and printing on your SeeMeCNC printer.
Slic3r, the main g-code processor for RepRap 3D printers, can be a little daunting when you are just starting out with your new printer. It can be very frustrating when one little setting is off by a millimeter and your entire print is wrecked.
For this tutorial I will assume a 0.7mm nozzle in all settings and 3.0mm filament - you have adjust to different settings accordingly. But the basics behind are the same and you will know after reading this Instructable how to get proper prints using Slic3r.
Slic3r is already bundled with the many of the most well-known host software packages: Pronterface, Repetier-Host, ReplicatorG, and can be used as a standalone program. This manual will provide guidance on how to install, configure and utilise Slic3r in order to produce excellent prints.
Welcome to the Slic3r Manual. The source for this manual is available in a GitHub repository. Help us to improve or translate it in your language. More Slic3r documentation is listed in the wiki. Libslic3r source internals are documented via Doxygen.
