Αποτελέσματα Αναζήτησης
This setting defines the maximum distance the extruder may travel along the X and Y axis. If the dimensions are not readily available for the printer then it can be easily measured. Be sure to measure from the lower left corner where the extruder nozzle rests when are the home position to the maximum distance the nozzle can travel in each ...
Slic3r takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware.
Slic3r takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Sprinter and Repetier firmware.
The following are links to tutorials for Slic3r, a g-code generator for 3D printers. If find excellent Slic3r tutorials and videos that are not linked here, please add them, or post them to this thread.
This guide will walk you through the steps of setting up Slic3r for slicing and printing on your SeeMeCNC printer.
Slic3r can be downloaded directly from: https://slic3r.org/download or https://github.com/slic3r/Slic3r/releases. Pre-compiled packages are available for Windows, Mac OS X and Linux. Windows users can choose between 32 and 64 bit versions to match their system.
This manual will provide guidance on how to install, configure and utilise Slic3r in order to produce excellent prints. Goals & Philosophy. Slic3r is an original project started in 2011 by Alessandro Ranellucci (aka. Sound). Readability and maintainability of the code are among the design goals, as well as power and flexibility.
