Αποτελέσματα Αναζήτησης
Symptoms may indicate trouble in the transmission, while actually the problem may be with the axle, driveshaft, universal joints, engine, or clutch. This is especially true of noise complaints. Before removing the transmission to diagnose an issue, road test to check the possibility of trouble in other closely associated components.
IDENTIFY YOUR TYPE OF TREMEC TR·3550 OR TREMEC TKO TRANSMISSION This service manual covers the TA-3550 (#2600682) and TKO (#2600708) model Tremec Transmissions. The part number is located on an identification tag on the right side of the transmission.
22 Μαΐ 2021 · UPDATE The stud on the front of the transmission for the throwout bearing was ~.025" too long and interfering with the clutch forks. I cut this back about 1/4" and the problem is solved. Brand...
Appropriate service methods and proper repair procedures are essential for the safe, reliable operation of all motor vehicles as well as the personal safety of the individual doing the work. This Manual provides general
26 Απρ 2007 · I have had the same noise in my Tremec. I have the TKO 600 and installed it in my 64 Comet. I notice no noise in first or second gear but a noticable noise in third , fourth, and fifth. I have just dropped the trans off at a professional trans guy who rebuilds Tremec transmissions only.
2004 Ford Mustang 4.6L (this transmission problem can affect other models equipped with the Tremec TR3560) Problem – A grinding sound may be experienced during the 1-2 shift. It may also be difficult to make this gear change. Solution – Replace the 1-2 synchronizer assembly, 1-2 shift fork and rail, synchro rings and cones.
27 Οκτ 2023 · Updating Chrysler Transition Control Module. This bulletin applies to 2017 Chrysler 300, Dodge Challenger and Dodge Charger vehicles built on or before March 22, 2017 and equipped with the 5.7L Hemi VVT engine and 6-speed manual Tremec transmission; and more. Customers may experience a MIL on.
