Αποτελέσματα Αναζήτησης
Ram Plate, Wedge, and logs while splitting. 12. Be thoroughly familiar with all controls and with the proper use of the Log Splitter. Know how to stop the Log Splitter and relieve system pressure quickly if needed. 13. Make sure all fittings are tight before applying pressure. 14. Be aware of the added length of the Log Splitter when ...
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Log Splitter Safety Warnings For your Own Safety read instruction Manual Before Operating Log Splitter. 1. DO nOt OpEratE WitH any GuarD DiSaBLED, DaMaGED, Or rEMOVED. Keep guards in place and in good working order. 2. Wear ANSI-approved safety goggles under full face shield, heavy-duty work gloves and steel-toe work boots during use. 3 ...
When servicing the Log Splitter, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Place the log on the Splitter Base as shown in FIGURES 1 and 4. Make sure the wedge on the Slide Assembly (3) is facing the log. (See FIGURE 1). 5. After reading and following all of the setup, safety, and operation warnings in the Robin® Operating Manual, turn on the engine. See FIGURE 5. Set the engine’s throttle all the way to the fast ...
Remove the stuck log from the Cutting Wedge split with a maul, or cut with a chainsaw. manually with a sledge hammer and pry bar. Page 14 For technical questions, please call 1-800-444-3353. ITEM 61594...
Log Splitter Wedge 4-Way Slip Installation Guide When installing the 4-way wedge over the single blade stock, be sure the bevel side is facing up. Bevel Side Up = CORRECT
