Αποτελέσματα Αναζήτησης
7 Αυγ 2020 · In this lab, you will configure the network devices in the topology to accept SSH sessions for remote management. You will also use the IOS CLI to configure common, basic best practice security measures.
The goal is to apply common best practices to harden the devices against unauthorized access. This document describes configuring basic security measures on network devices in a lab topology. The objectives are to configure basic device settings, secure the router, and secure the switch.
In this Guided Project, you will be able to configure DHCP on your router and secure the ports of your switch from the attackers. Skills you'll practice Network Security
5 Φεβ 2024 · This project will explore creating a network topology using a Cisco packet tracer. Throughout the project, we will authenticate the switches and the router in the network topology, make PCs...
In this lab, you will configure the network devices in the topology to accept SSH sessions for remote management. You will also use the IOS CLI to configure common, basic best practice security measures. You will then test the security measures to verify that they are properly implemented and working correctly.
Part 1: Configure Basic Device Settings Part 2: Configure Basic Security Measures on the Router Part 3: Configure Basic Security Measures on the Switch. Background / Scenario. It is recommended that all network devices be configured with at least a minimum set of best practice security commands.
21 Απρ 2022 · This document outlines a lab focused on securing network devices through configuration of basic settings and security measures. It includes a topology, addressing table, and step-by-step instructions for setting up devices and verifying security implementations.
