Αποτελέσματα Αναζήτησης
27 Μαρ 2020 · From the manual: Using AC Power. To power your CB radio from your home, you will need a 12V DC power supply. that provides a minimum of 2.5A at 12V.
22 Ιουν 2020 · There are several ways that a power supply can cause interference to your radios. The electronics may emit RF noise and you may be able to reduce that by shielding the box. The 120 VAC power cable and the 12 VDC cable to your radio may carry RF noise from the power supply.
25 Σεπ 2009 · There is a device out there that you connect to a battery and your power supply, when the power is on the power supply powers the radios and it charges the batteries. When the power goes out it switches everything right over to the battery.
13.8 Volt 25 Amp compact Switching Power Supply designed for Radios so little RFI is produced. Product is not in production More Info: http://WWW.RADIOSHACK.COM
22 Δεκ 2012 · Tighten the binding posts to secure the wires in place. Connect to wall outlet Connect to a standard 120V AC outlet. Switch on the power supply Press POWER to turn on the power supply. If POWER does not light: • Check your connections and confirm the AC outlet has power.
Building a DC Uninterruptible Power Supply for Your Ham Shack. West Mountain Radio provides all the tools you need to build a simple, customizable, and cost-effective uninterruptible power supply (UPS) right at home!
Super PWRgate PG40S units eliminate the danger of connecting a power supply directly across a battery, which can damage many power supplies. Using your power supply and a PWRgate also avoids introducing hum and RF interference that is caused by most lead-acid battery chargers.
