Αποτελέσματα Αναζήτησης
A radius rod (also called a radius arm, torque arm, torque spring, and torsion bar) is a suspension link intended to control wheel motion in the longitudinal (fore-aft) direction. The link is connected (with a rubber or solid bushing) on one end to the wheel carrier or axle, on the other to the chassis or unibody of the vehicle.
The combination of the panhard rod and the torque tube allows the easy implementation of soft coil springs in the rear to give good ride quality. In addition to transmitting the traction forces, the torque tube is hollow and contains the rotating driveshaft.
18 Σεπ 2019 · TRP All-Makes Torque Rods are manufactured in the USA and are designed to prevent bushing walk-out and for an extended life. TRP Torque Rod Assemblies have rubber bushings to maximize vibration absorption and extend the life of your suspension.
The shafts are typically made from steel or aluminum with a solid or hollow construction. Most torque rods will be straight, but on certain suspensions, they may be purposely curved to allow clearance to suspension components.
A magnetorquer or magnetic torquer (also known as a torque rod) is a satellite system for attitude control, detumbling, and stabilization built from electromagnetic coils. The magnetorquer creates a magnetic dipole that interfaces with an ambient magnetic field, usually Earth's, so that the counter-forces produced provide useful torque.
To keep things simple, we're going to focus on structures with a circular cross section, often called rods or shafts. When a torque is applied to the structure, it will twist along the long axis of the rod, and its cross section remains circular.
Learning Objectives. Describe how the magnitude of a torque depends on the magnitude of the lever arm and the angle the force vector makes with the lever arm. Determine the sign (positive or negative) of a torque using the right-hand rule. Calculate individual torques about a common axis and sum them to find the net torque.
