Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

  1. 18 Σεπ 2019 · Inspect torque rod fasteners and torque rod bracket fasteners to ensure they are tightened to specification; Visually inspect the torque rods for bends, cracks, or other damage; Inspect the bushing looking for worn, torn, cut or walked out bushings; Check the mounting locations for elongated holes, cracks or other damage

  2. en.wikipedia.org › wiki › MagnetorquerMagnetorquer - Wikipedia

    A magnetorquer or magnetic torquer (also known as a torque rod) is a satellite system for attitude control, detumbling, and stabilization built from electromagnetic coils. The magnetorquer creates a magnetic dipole that interfaces with an ambient magnetic field, usually Earth's, so that the counter-forces produced provide useful torque.

  3. The combination of the panhard rod and the torque tube allows the easy implementation of soft coil springs in the rear to give good ride quality. In addition to transmitting the traction forces, the torque tube is hollow and contains the rotating driveshaft.

  4. Unlike axial loads which produce a uniform, or average, stress over the cross section of the object, a torque creates a distribution of stress over the cross section. To keep things simple, we're going to focus on structures with a circular cross section, often called rods or shafts.

  5. What is a Torque Rod? Not only do torque rods control the wheel movement of your rig, they also serve several additional purposes. The torque rod has a multi-functional role in your commercial vehicle’s suspension system. They control the driveline angles of the vehicle and restrain rotation of the axle housing while accelerating and braking.

  6. 10 Οκτ 2022 · Torque rods are usually made of steel or aluminum and are attached to the vehicle’s suspension. They are also made of rolled steel, which prevents them from sliding out of place. Torque rod bushings can be either rubber or urethane.

  7. The shafts are typically made from steel or aluminum with a solid or hollow construction. Most torque rods will be straight, but on certain suspensions, they may be purposely curved to allow clearance to suspension components.

  1. Γίνεται επίσης αναζήτηση για