Αποτελέσματα Αναζήτησης
Double-Wire Ferrules Note: The ferrules below are considered “double-wire” ferrules. They are sized to accommodate two conductors in one end sleeve, which enables
p is 1.72e-8 at 20C with a tempco of +0.0039/K; 1.75354e-8 at 25C and 2.02186e-8 at 65C. Length is in meters and Area is in Sq-Meters.
AWG: In the American Wire Gauge (AWG), diameters can be calculated by applying the formula: D(AWG) = 0.005 * 92 ((36-AWG)/39) inch. For the 00, 000, 0000 etc. gauges you use -1, -2, -3, which makes more sense mathematically than “double nought.”
Listed below are some helpful documents with information regarding our products: Ferrule/Conductor Pull-Out Force Chart. Wire Size Chart - MM² to AWG Conversion.
• Ferrules are the preferred alternative to twisting wire stands or tinning the wire end before terminating into a terminal block • Ferrules are thin-walled copper tubes, which are mechanically crimped onto the ends of stranded wires • They are easy to use — simply strip the wire, slide the ferrule onto the end of the wire and crimp
The size required for the application depends on the AWG of the wire. The color used can be the user’s choice unless specified in the panel build design; typically, however, blue is used for 14 AWG, black for 16 AWG, and red for 18 AWG.
Insulated single ferrules (long version) Insertion Funnel is made of Polypropylene and is heatresistant up to 105 Deg. C, Material: E-Copper, Surface electro tinned, Minimum Coating Thickness 3μm.
