Αποτελέσματα Αναζήτησης
Wood required by Section 2304.12 to be preservative treated shall bear the quality mark of an inspection agency that maintains continuing supervision, testing and inspection over the quality of the preservative-treated wood.
1 Ιαν 2019 · A deck is an exposed exterior wood floor structure that is permitted to be attached to the structure or freestanding. Roofed porches (open or screened-in) are permitted to be constructed using these provisions. AM101.2 Deck design. Computer deck design programs are permitted to be accepted by the code official. SECTION AM102. FOOTINGS.
Carolina Timberworks partners with architects, builders, and homeowners to design, engineer, fabricate, and professionally install custom post and beam and timber frame structures in our home state of North Carolina and anywhere in the United States. Altogether, we’ve completed 700+ timber framing projects.
Wood beams and girders shall be of sawn or glued-laminated timber and shall be not less than 6 inches (152 mm) nominal in width and not less than 10 inches (254 mm) nominal in depth.
A built-up header consisting of at least two 2-inch by 12-inch (51 mm by 305 mm) boards, fastened in accordance with Item 24 of Table 2304.10.1 shall be permitted to be used. A spacer, if used, shall be placed on the side of the built-up beam opposite the wood structural panel sheathing.
Wood beams and girders shall be of sawn or glued-laminated timber and shall be not less than 6 inches (152 mm) nominal in width and not less than 10 inches (254 mm) nominal in depth. Framed sawn or glued-laminated timber arches, which spring from the floor line and support floor loads, shall be not less than 8 inches (203 mm) nominal in any ...
At Homestead Timber Frames, we cater to North Carolina home owners, contractors, and business owners alike. Regardless of your background or role, our dedicated team is committed to helping you craft your legacy by bringing your timber frame dream to life.
