Αποτελέσματα Αναζήτησης
Typically, Zinsser 123 Primer dries to the touch in 30 minutes, and you must wait 1 hour before recoating. Notably, it is important to note that while the primer may be dry to the touch in 30 minutes, it may not be fully cured for up to one week.
Tinting the primer toward the color of the topcoat helps hide in one coat. Shake or stir well before using. DRY TIME Dries to the touch in 30 minutes, can be recoated in 1 hour. Full adhesion and hardness develops in 7 days. Lower temperatures, higher humidity, and the addition of tint will prolong dry and cure time. Allow more time at
Dry time: full bonding guaranteed after primer is totally cured (7 days). Lower temperatures, high moisture substrate and addition of colorants will extend the dry time and cure time.
Bulls-Eye 1-2-3 Primer effectively blocks stains from grease, handprints, asphalt, crayon, graffiti, rust stains, light water stains and cedar or redwood bleed. Note: When priming over bare cedar or redwood, allow 24 hours dry time before painting. Certain applications may require a second coat of primer. Prime severe water and smoke stains and ...
24 Ιαν 2024 · Bulls Eye® 1-2-3 is our classic universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces.
DRY & RECOAT . Dry and recoat times are based on 70ºF and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 5 minutes and can be topcoated in 30 minutes with latex or oil-based paints. For best results, allow primer to cure overnight before applying strong solvent-based topcoats. CLEAN-UP . Wipe off tip before ...
Stain blocking sealer & adhesion primer. Seals stains of graffiti, grease, rust, cedar & redwood tannin Rust inhibitive coating, ideal for new metal Adheres to most surfaces without pre-sanding or deglossing. Fast drying White and pastel shades.
